Eonvic 3.5mm 1/8" TRS to 3 pin Mini-XLR Audio Cable For AKG K7XX headphones
About this deal
To wire these we use a 4 core and screen cable, and wire the unused pin inside the XLR to the ground inside the jack. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. All our cables are soldered using lead-free silver solder (4% silver) to ensure the best quality joins for both signal and strength. This is a custom hand braided cable for 3 pin mini XLR headphones like the DT1770/DT1990 and some AKG. As mentioned above, our cables are designed to keep the signal as pure as possible with a perfectly flat response.
Please keep in mind that changes to the cable spec in comparison to an existing cable you have can affect the sound/signal, for example longer lengths tend to sound more warmer/rounded because they usually have a greater capacitance and antenna effect. Our method is tried and tested by professionals around the world, you will find these cables in use in high end DSLR camera rigs and PA setups. At KONDOR BLUE, we always stand behind our extensive line of premium quality cables with a lifetime warranty. If you need something which you do not see here then please do get in touch and our friendly team will happy to assist you. With a standard stranded copper wire, as charge can move from one strand to another, they act as one thick solid conductor.Usually used for microphones and other audio devices with mini-XLR connections Heavy duty metal jack plugs with rubber strain relief s. Silver is the better conductor; however gold is highly resistant to corrosion so is favoured for its durability. Some adapters may look identical on the outside but inside the wiring is different and not compatible with one another. ohms per meter, which is very low; we also keep the capacitance and skin effect incredibly low, so it gives a pretty much perfectly flat impedance across all audio frequencies, from 1hz right up to 100+KHz.