KREG® Drawer Slide Jig
About this deal
Whether you’re installing one cabinet door or making doors for an entire kitchen, the Concealed Hinge Jig provides reliable, consistent results.
The Cabinet Hardware Jig features movable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and small pulls up to 5" from center hole to center hole. The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Whether you’re updating cabinets or you’re building a project from scratch, mounting drawers is always a challenge. It's a good rule of thumb to install hinges so they are 2" from the top and bottom of the door they are being attached to.
The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet — one on each cabinet side — and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. For items which develop a fault after 30 days of purchase, please contact us with details of the fault and evidence in the form of pictures where possible. The Drawer Slide Jig works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and undermount slides. Whether you're installing one new knob or dozens of drawer pulls, our Cabinet Hardware Jig takes the guesswork out of the process, ensuring accuracy and consistency every time.
Indexing cams ensure that the jig positions the bit to drill a hole at the required offset - which is dictated by each hinge - and a built-in stop collar ensures that the cup depth is correct every time. Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well.You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. Kreg offers you a whole system of drilling templates for pocket hole joinery, our "Pocket-Hole Jigs".
All you need is a drill and a 3/16", bit, and the ability to set the jig to match your hardware and the position where you want it to go. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. The Drawer Slide Jig works with slides of all kinds - ball-bearing, epoxy-coated and undermount - and can be used in faceframe and frameless cabinets. Please do not hesitate to contact our in-house Sales Team via live webchat for Free of Charge technical advice.makes life much easier its like having a second pair of hands very good product solid manufacture should last a long time. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly.